Launch Kontrol by Wire. The Next Generation.

Launch Kontrol by wire has been designed to provide the cheapest, remote option for consumer or Professional firework ignition.

It is based on a 4 cue panel board powered by a standard 9v battery.

It has an arm button, continuity test and 4 individual Fire buttons all illuminated.

Boards can be connected in series. The first board will act as a main panel and arm and check continuity of every board.

Cues can be Fired in any order.

The clips use our original non-pyrogen hot wire technology. Copied by many companies and used by tens of thousands for safe remote, firework ignition.

These newly improved clips have a solid pivot point so that the two halves cannot be easily separated.

In addition, these clips have a plug connector, wiring can be used over and over with only the clip head discarded. As a result, the cost per clips will be a fraction of anything else on the market.

The wiring of the board for the display out to the fireworks will be by means of off the shelf, copper CAT 5 or Cat 6 cable.

The rear of the panel is flat and suitable for own branding. This has to be the coolest pyrotechnic promo item anywhere.

Says Mike Knox of Launch Kontrol UK - more photos and videos to come soon on the epic fireworks blog.