A few years ago the Epic Fireworks team was asked to do a firework display for a very big wedding – money was no object – and all the customer demanded was loads and loads and loads of big ass rockets for the finale. Big rockets was no problem for us – the problem we encountered was that we couldn’t load the rocket racks fast enough…..
To overcome this dilemma we decided to build the ultimate rocket launching rack – The Epic Fireworks Rocket Launcher
Pen was put to paper – the brief was simple – we desired something with minimum set time – and maximum performance.
A perfect circle was marked on the ground – this was used as a guide.
The circumference of the Epic Fireworks Rocket Launcher is a massive 31.4 feet.
The stand was then made to support the rocket rack.
Due to the huge size of the Epic Fireworks Rocket launcher, modifications were made to make it easier to transport.
A small motorised rubber wheel was used to rotate the Epic Fireworks Rocket Launcher.
The Epic Fireworks Rocket Launcher weighs a monstrous 300kg and takes 20 minutes to erect.
The blow torch had to be placed at an angle. The reason for this was that when we placed the blow torch straight in line – the thrust of the rocket (lift charge) blew the flame out !
The finished product can hold 134 big rockets.
One revolution takes 15 minutes and 40 seconds.
Approximately 5-7 seconds between each rocket being fired.
The video below is a test run of 4 tomahawk rockets.
The Epic Fireworks team decided to fill the rocket launcher with King Rockets and Sky Thriller rockets. We managed to fit 67 King Rockets and 67 Sky Thriller rockets – these will be fired the weekend after the 5th November 2011 – we will get it videoed and upload the footage to the Epic Fireworks YouTube channel